Chrysler Radio Codes

Chrysler Radio Removal Guides

To locate your serial number, the first step is to remove keyword2 radio from the vehicle. We provide the original code for keyword3 radio based on the serial number, unlike main dealers who use keyword2 vehicles registration number. This means the codes we supply are accurate, especially if its a second hand unit or been replaced at any stage in its life, by a previous owner or dealer.

Chrysler radios do not require special tools to remove. 
All that you required is a philips screw driver to remove the surrounding panels.

1. Locate and remove the screws at the top of the surrounding panel and also at the bottom, usually near the ashtray area.
2. Once removed you should be able to pull the panel away from the dashboard to reveal the radio's information.
3. If you need to remove keyword3 radio they are normally held in place by 4 screws.

Once you have successfully removed keyword2 car radio, Locate the serial number by inspecting the top of the radio.

Chrysler Serial Number Location Guide

Once you have successfully removed your car radio, Locate the serial number by inspecting the top and right hand side of the radio. Serial numbers are not always printed or in clear view and may also be lightly engraved into the metal casing of the radio. The examples below should give you an idea what kind of serial number you are looking for to enable you to use our online decoding service successfully.

An example of serial numbers commonly found on Chrysler Car Radios :

• Serial : T 00 AM 058 4 M0052
• Serial : TQA CC 928 3 48593

Before getting a code we recommend you first ensure your Chrysler radio is not blocked. Simply turn the radio on, and try to enter the first digit of any code "ONLY THE FIRST DIGIT" If this is ok, immediatly turn the radio off. If you find however that you are unable to enter any digits, leave your radio powered up for 1 hour continuously to reset itself.

Whilst you have it removed also check for any labells such as Repaired... Exchange.. and check that labels such as Warranty Void if Removed are in-tact.

If your radio is blocked, or the codes you have or we supply fail to work, we also offer a Chrysler Workshop Decoding service, allowing us to reset or reprogramme the majority of radios which require a code.

Instant Car Radio Code Guarantee (money back)

All of our radio codes are covered under a guarantee, The instant codes such as those listed below come with a 7 day money back guarantee if the code fails to operate your radio, or you can choose to bring your radio into our workshop for a decode at no additional charge.  If you wish to send in a radio under our instant code guarantee, there is an additional £6.50 to pay for return shipping.

The following selection of radio codes from our website are covered by our Instant Code Guarantee.  It is important to note, All codes supplied for these radios are 100% guaranteed original codes your car radio left the factory with, the only reason for a code to not work would be purely that it had previously been decoded, recoded, reprogrammed or repaired or that you supplied the wrong information.  To be eligible for our money back guarantee, we will require you to first confirm your radio's details so we can manually check the supplied code.

Premium Car Radio Code Guarantee (workshop re-code)

The premium codes such as those listed below are not eligble for our 7 day money back guarantee due to the codes being supplied directly from the radio manufacturer.  They do however come with our Workshop Decoding Guarantee, where you can bring in, or send of your radio for physical decoding at NO additional charges, we even cover the return postage fees.

If we provide a radio code for one of the above and it does not work, you are entitled to send it into us for reprogramming in our workshop. The radio must be sent into us at SWS Solutions, Northgate Place, Crawley, West Sussex, RH10 8BB